AGM Battery

This can be caused by a number of factors, including age or over-discharging. To troubleshoot this issue, try the following:

1. Ensure that the battery is not being charged and used as the same time.

2. Over-discharging the battery can cause it to lose capacity over time. Ensure that you are not using the battery below its recommended discharge level.

3. Check its age. AGM batteries have a limited lifespan, and they may lose capacity as they age. If your battery is several years old, then it is considered normal.

4. Check the charging process: Ensure that you are using a compatible charger and that the battery is not being overcharged. Overcharging can cause the battery to heat up and damage the cells.

It is recommended to use a dedicated AGM battery charger according to the rated charging current. Then have your battery go on a full charge.

If your AGM battery is not providing enough power, it could be due to several reasons, including:

Over-discharging: AGM batteries should not be discharged below 50% of their capacity, as this can damage the battery and reduce its lifespan.

Age: AGM batteries have a limited lifespan, and if your battery is more than 5 years old, it may be time to replace it.

Corrosion: Corrosion on the battery terminals or cables can interfere with the battery's ability to provide enough power.

If your AGM battery is not charging, it could be due to several reasons, including:

Loose connections: Check all the connections between the battery, charger, and any other components to make sure they are tight and secure.

Faulty charger: If your charger is not working correctly, it may not be able to charge the battery properly.

Overheating: AGM batteries can overheat if they are charged too quickly or with an unsuitable charger.

Troubleshooting steps:

Check the charger to ensure it is compatible with AGM batteries and is working correctly.

Check the battery terminals and cables for any signs of corrosion or damage. Clean the terminals and cables if necessary.

If the battery is overheating, stop charging it immediately and let it cool down before trying again.

It is generally not advisable to connect AGM batteries in series or parallel. Additionally, varying chemistries, voltages, and capacities among different AGM batteries can cause imbalances between them and potentially cause damage to the batteries or the equipment being powered..

This battery is exclusively intended for energy storage and cannot be utilized as a starter battery. Energy storage batteries are engineered to reserve energy for later use, such as in renewable energy systems or electric vehicles. They possess high capacity and are optimized for consistent, gradual power output. Conversely, starter batteries are crafted to deliver a brief but intense burst of power to start a vehicle's engine. They are optimized for high power output instead of long-term energy storage.

Kindly refer to the product link for detailed information on its dimensions.

It is not advisable due to the potential impact of high engine temperatures on the battery's performance and lifespan.

Make sure that the charging current falls within a reasonable range stipulated in the specifications and that you're using a charger that's compatible with the battery.

No, the battery must be kept in an upright position. This is because the battery's internal design requires the electrolyte to be evenly distributed throughout the battery's plates and absorbed glass matting. When the battery is laid on its side, there's a risk of the electrolyte spilling or leaking, which can cause damage to the battery's internal components and potentially create a safety hazard.